It Started as a Joke, But They Actually Managed to Shove a Twin-Turbo V8 Into a Ford Maverick

Image Credit: Tucci Hot Rods / Instagram.

The Ford Maverick was designed to make pickup ownership affordable and practical, not to accommodate a Mustang V8. Its compact engine bay makes the idea of squeezing in a twin-turbocharged Coyote sound like something dreamed up during a particularly ambitious shop conversation.

For Tucci Hot Rods, that is almost exactly how the project began. After building a customized Maverick for Ford in 2021, the New York shop joked about replacing its four-cylinder engine with something way less sensible.

As owner Dave Tucci explained to Ford Muscle, the joke eventually became a serious plan. The result appeared at the 2026 SEMA Show, turning the shop’s original show truck into a radically different machine.

The finished pickup combines a 5.0-liter V8, two turbochargers, and rear-wheel-drive hardware adapted from other vehicles. Getting those components to coexist inside a truck never designed for them required some inventive fabrication.

Making Room for Eight Cylinders

 

 
 
 
 
 
View this post on Instagram
 
 
 
 
 
 
 
 
 
 
 

 

A post shared by Tucci Hot Rods (@tuccihotrods)

The centerpiece is a second-generation Coyote 5.0-liter V8 equipped with twin Hellion turbochargers. Tucci is targeting approximately 800 horsepower, although the combination has the potential to support up to 1,200 horsepower.

Installing it meant cutting into the transmission tunnel and firewall, along with modifying the original front crossmember. Tucci told Ford Muscle that removing roughly three-quarters of an inch from the rear crossmember helped create the necessary clearance.

The original rear-steer suspension arrangement also presented a problem because the steering rack occupied space needed by the new drivetrain. After experimenting with several Mustang K-members, the team modified the Maverick’s original crossmember and used 3D scanning to develop custom lower control arms.

A Drivetrain Built From Scratch

Screenshot 2026 11 18 13.21.33 e1795001086345
Image Credit: Tucci Hot Rods / Instagram.

The engine connects to a ZF 8HP70 eight-speed automatic through an adapter, while a Turbolamik controller handles shifting. A custom driveshaft sends power to a rear end fitted with a 2017 Mustang center section, with the Maverick’s existing rear suspension still in place.

Tucci also incorporated Mustang steering components and kept the coilovers installed during the truck’s first SEMA build. The conversion required custom engineering rather than simply transferring a complete Mustang drivetrain.

The Exhaust Is Impossible to Miss


Instead of sending exhaust pipes beneath the truck, Tucci routed them through openings in the front fenders. Custom 3D-printed outlets draw inspiration from the Maverick’s original fender vents, with separate exits for turbo exhaust and wastegate discharge.

The truck has already been shown running, although its final power output hasn’t been independently documented. What started as a joke now has a twin-turbo Coyote under the hood, Mustang-derived running gear, and exhaust outlets poking through the fenders. Ford never intended the Maverick to accommodate this kind of hardware, which makes Tucci’s finished truck all the more interesting.

Author: Andre Nalin

Title: Writer

Andre has worked as a writer and editor for multiple car and motorcycle publications over the last decade, but he has reverted to freelancing these days. He has accumulated a ton of seat time during his ridiculous road trips in highly unsuitable vehicles, and he’s built magazine-featured cars. He prefers it when his bikes and cars are fast and loud, but if he had to pick one, he’d go with loud.

Leave a Comment

Flipboard