A 1989 Ford Mustang GT that spent 25 years off the road has finally returned to public streets, thanks to its original owner and a seven-year restoration project. The car has a modern Coyote V8 under the hood, but getting it moving again took way more effort than the engine swap.
The Mustang belonged to the owner during high school, when a blown head gasket eventually ended its driving days. Rather than selling it or sending it to a junkyard, the family kept it in a garage, where it sat safe and sound for 18 years.
The owner, who documents the project on his YouTube channel Sleazy’s Garage, eventually brought the Mustang home and began rebuilding it. What followed was a lengthy restomod project involving a new drivetrain, suspension work, electrical repairs, and countless smaller jobs.
In October 2026, the owner finally shared the result with the Foxbody community on Reddit. The Mustang had made it to an inspection shop under its own power, marking its longest trip in decades. For a car that had spent most of its adult life sitting still, that was a pretty substantial accomplishment.
A Second Life
The owner has documented the restoration across more than 150 installments of his Sleazy’s Garage YouTube series. The project has been about more than making an old Mustang look presentable. His goal was to turn the car he remembered from high school into something he could truly enjoy driving again.
One of the biggest changes was replacing its original 5.0-liter V8 with a Coyote engine from a 2017 Mustang GT. The swap brings modern V8 performance to the considerably older Fox-body platform, although fitting the engine required extensive modifications.
According to the owner, the Coyote originally produced approximately 420 horsepower and 400 pound-feet of torque. With long-tube headers, an aftermarket intake, and a planned 93-octane tune, he hopes to reach roughly 450 horsepower. That remains a target rather than a confirmed output.
He also installed a T-56 Magnum six-speed manual transmission supplied by Silver Sport Transmissions, along with a McLeod clutch. The owner said the Mustang originally had an automatic transmission before he converted it to a T-5 manual years earlier.
The new setup is a significant departure from the car’s factory configuration. Hagerty’s history of the 1989 Mustang GT lists the original 5.0-liter V8 at 225 horsepower, making the modern engine a substantial upgrade even before additional tuning.
The engine bay has received nearly as much attention as the drivetrain. In response to compliments on Reddit, the owner explained that he used smooth replacement fender aprons from Late Model Restoration, followed by extensive welding, sanding, and finishing work.
One commenter praised the clean engine installation, prompting the owner to acknowledge that smoothing the engine bay had been a major learning experience in itself.
The Little Things
With the big mechanical work largely behind him, the final preparations for road use involved problems familiar to anyone who has restored an older car.
In his first-drive video, the owner adjusted the front suspension to improve ride height and replaced his badly deteriorated steering wheel with a used, original-style unit. He also added a rearview camera to the Mustang.
Even the horn became an unexpected project. After replacing a relay and checking the wiring, he traced the problem to a contact mechanism behind the steering wheel. He determined that a damaged contact was preventing the circuit from working properly and ordered a replacement part. Back you go ya naughty plug!
The owner also phoned a friend to reinstall the hood, which required repeated adjustments to line up with the fenders. Bodywork remains unfinished, and several rust-affected areas still need attention.
Still, the car was ready for a short road test. With his wife alongside him, the owner drove the Mustang up the road and back. He reported that the ride was smooth, and he was able to reach fourth gear!
He later took it farther, driving to a shop for its inspection. Sharing the milestone on Reddit, he wrote, “This is a huge milestone and my goal for the year.”
Still More Ahead
Although the Mustang is moving again, the owner isn’t treating the project as finished. The transmission and rear axle need approximately 500 miles of break-in driving before he completes the engine tune.
Cosmetic work is another substantial undertaking. The owner plans to learn more about bodywork over the winter and hopes to paint the car in the spring. Some of the exterior panels still need repairs, while the interior has additional finishing work ahead. As we’ve seen before, bodywork can be the most frustrating and time-consuming.
The Mustang has also attracted considerable attention from other Fox-body enthusiasts. Several Reddit commenters praised the engine conversion, while others compared it with their own projects that had spent years sitting unfinished.
Asked how the car feels compared with its original engine, the owner admitted that he could no longer remember exactly how it drove with the old 302 around 2001. The new six-speed transmission, however, had made a strong impression.
“It’s definitely a new beast,” he wrote.
The owner also revealed that his wife helped find the replacement engine and handles graphic design for his YouTube channel. When another commenter asked about future modifications, he mentioned that she would eventually like him to add a supercharger. (We would too!)
For now, the next priorities are putting miles on the rebuilt drivetrain, completing the tune, and dealing with the Mustang’s remaining bodywork.
